iBend Pipe6.4 - App Store

version 6.4

Version History What's New in version 6.4:
+ See behind the curtain! Now you can see how the values are derived on the multiplier method screens.
+ Bend calculations that use the multiplier method now visually flag a bend if it's invalid.
+ The angle input is easier to work with: bigger buttons, a slider that steps in exact 1° increments, and a layout that matches the other input panels.

Bugs Fixed:
- Large Accessibility Fonts caused overlapping on the screen controls.
- Gain to bender centerline radius calculation was corrected to include pipe diameter.
- Performance fixes for the Level View. 6.4 Sep 21 Version 6.3

The basic 3 bend saddle calculation that allows you to pick from different sets of angles is back by popular demand.
The Watch app now has a round and square object in the corner calculation.
UI cleaned up for consistency with shapes and colors. 6.3 Sep 13 Version 6.2

The basic Kick calculation is back, simple and efficient, by popular demand.
The dual slider input view for value entry has a "long press" function to increase value rapidly instead of tapping repeatedly on the "+ 1" button.

Bug Fixes:
The slider input will not allow values below 1" to be entered.
The live angle view stayed live even when app was in background. 6.2 Sep 7 Version 6.1.

Basic calculation's double slider input is back, making it more precise and faster to input measurements.
Apple Watch companion app now has a Parallel Offset adjustment calculation. 6.1 Aug 29 This is a major update to iBend Pipe!

• Completely rebuilt with a modern Swift codebase for a better foundation going forward

• Updated and improved the interface to fix numerous layout issues from previous versions

• New native inch and fraction keypad for faster, more precise measurement entry

• Sliders and increment/decrement buttons have been replaced with the new keypad for a more efficient workflow

• Calculation results are now displayed on the same screen as your inputs

• All calculation screens are now truly one-page—enter your measurements and see your results without navigating between screens

This update lays the foundation for the future of iBend Pipe while making the app faster and easier to use on the job. 6.0 Aug 24 Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible. 5.3 01/02/2018 Bug Fixes

Fixes non responsiveness in Offset - 1st and 2nd bend critical calculations in INCH mode

Thanks Rodney! 5.2 10/05/2017 Bug Fixes
-Crashing when going to help screens on iOS 11 5.1 10/04/2017 Fast Calcs are only a flick of the wrist away...

Introducing the Offset Calculator App for your Apple Watch
-Calculate bends and shrink on a convenient one screen app
-Leave your phone in your pocket 5.0 02/12/2016 Had a couple "doglegs", "wows", "bugs" that I've resolved.

Thanks for all your great reviews and word of mouth recommendations.

You guys want an Apple Watch - Offset Calculator???? Let me know... 4.2.2 12/05/2015 Bug Fix.

Fixed crashing bug, when going to level view from basic 90° calculation screens. 4.2.1 07/21/2015 All basic, one screen calculations have been restored. The best of both worlds.
There is a new Basic / Advanced setting screen to give you complete control over which type of calculation is available. Choose Basic or Advanced or Both.

Bugs have also been squashed. Thanks to all the Beta testers.

NEW - A fast and always accessible offset calculator widget is now available. 4.2 07/06/2015 4.1
Back by popular demand, simple offsets, simple rolled offset, simple 3-bend and 4-bend saddles.

I will be adding the remaining "simple" calculations for 90's and corner bends in the next update, 4.2. I am working overtime to get this app working the way you want it.

Thanks for your feedback everyone. I want this app to the best for you. 4.1 06/24/2015 +ACCURATE CALCULATIONS
Centerline bending radius is now used to make all calculations to offer accurate calculations when compared to bending multiplier methods.

+BENDER PROFILES
Almost 100 different bender/pipe combinations included. You have the ability to tweak or completely modify any of the combinations to match your bender on the field. 4.0 06/10/2015 Fixes crashes using the back to back 90 calculation on devices running iOS 5.0, 5.1. 3.0.1 01/11/2013 *Version 3.0.1 has been submitted to Apple to fix crash when using Back to Back 90 calculation on iOS versions 5.0 and 5.1.

iBend Pipe, the best conduit bending on an iPhone, just got better.

New calculations include Back-To-Back 90°s, Kicked 90°s.

A flashlight has been added for those low light job conditions, no need to fire up a different app just use the built in flashlight utility.

The digital level has been reworked to respond faster to changes in angle.

The user interface has been cleaned up to make you proud to show it off to your buddies.

Don't know what the center of a bend is? Well I show you how to mark the center of bend for any angle and pipe size, with pictures.

Thank you guys for all your comments and suggestions, I read each and every email, and I try to incorporate your suggestions as I can. 3.0 01/07/2013 The best conduit bending app just got better!

-All New 90° Bend Calculation for Imperial (Metric coming soon)
with customizable bender take-ups.

-4 - Bend Calculation for Metric 2.10 10/26/2012 4 Bend Calculation is finally here!!!

A metric version of this calculation will be included in the next update. 2.9 04/27/2012 The best is yet to come... , but this is what this update includes:

- Fixed some minor bugs.
- Added a contact page to receive your comments, questions or suggestions.

I am currently working on a 4 point saddle calculation update, it has been a while, but I finally have some time to get this finished for you. Thank you for making this the #1 conduit bending app for iOS. I appreciate all your feedback and read every email that is sent. I'm a one man team, and your comments help fuel my late night coding. Thanks again. 2.8 04/21/2012 -ADDED BUILT IN LEVEL FINDER

--It has a "ZERO" button to calibrate level to 0, because we
know that nothing is really level out in the field.

--Level is automagically tuned to whatever angle you were bending.

---If you are bending a 90 it starts to beep around 90°

---If you are bending a 3 point saddle, it has both angle measurements in memory and you can toggle between target angles with the tap of a button.

---If it is custom angle, no sweat it knows you are trying to match that goofy 18° offset that your grandpa installed, and it'll let you know when you are close. 2.7 05/17/2011 -Added all new images for retina display

-Added animation in most of the views to make your friends drool - "...yeah, there are other bending calculator apps - but do they look like this?"

-Thanks for making "iBend Pipe" the #1 conduit bending application. Stay tuned for more updates, and as always keep those 5star rating coming.

-future updates include customizable bender takeups for 90° bends and a built in level finder 2.6 05/09/2011 - Added 90° Bend Calculation for Hand Benders

1/2" has a take-up of 5"
3/4" has a take-up of 6"
1" has a take-up of 8"

Look for it under the "More" tab.

-Metric version to be added later. If you use metric benders, email me at support@ibendpipe.com to get your input so that the correct metric take-up is entered into the calculations. First one to do so, gets promo codes for all my apps, iBendOffsets, My Bender, and Circuit Colors which allow you to use these free for one month. Thank you. 2.4 01/13/2011 -Added Retina Support

-Added Concentric Bend Calculation (for Imperial Measurements) under the "More" Tab. 2.3 12/15/2010 Added

+ Calculation for a compound 90 with a round obstruction

+ Calculation for a compound 90 with a square obstruction

+ Calculation for a compound 90 with a rectangular obstruction

+ Enhanced readability of display by coordinating colors of measurements with controls. 2.2 09/30/2010 -Calculate ROLLING OFFSETS by imputing horizontal and vertical distances.

-Total Shrink calculation added to 3-Bend Saddle

-Fractions and Metric Versions are supported

-New Graphics and Color Coordination of Sliders,that make it easier to see what value you are changing

-Optimization of code for better performance 2.1 09/17/2010

version 6.4

Version History What's New in version 6.4:
+ See behind the curtain! Now you can see how the values are derived on the multiplier method screens.
+ Bend calculations that use the multiplier method now visually flag a bend if it's invalid.
+ The angle input is easier to work with: bigger buttons, a slider that steps in exact 1° increments, and a layout that matches the other input panels.

Bugs Fixed:
- Large Accessibility Fonts caused overlapping on the screen controls.
- Gain to bender centerline radius calculation was corrected to include pipe diameter.
- Performance fixes for the Level View. 6.4 3d ago Version 6.3

The basic 3 bend saddle calculation that allows you to pick from different sets of angles is back by popular demand.
The Watch app now has a round and square object in the corner calculation.
UI cleaned up for consistency with shapes and colors. 6.3 Sep 13 Version 6.2

The basic Kick calculation is back, simple and efficient, by popular demand.
The dual slider input view for value entry has a "long press" function to increase value rapidly instead of tapping repeatedly on the "+ 1" button.

Bug Fixes:
The slider input will not allow values below 1" to be entered.
The live angle view stayed live even when app was in background. 6.2 Sep 7 Version 6.1.

Basic calculation's double slider input is back, making it more precise and faster to input measurements.
Apple Watch companion app now has a Parallel Offset adjustment calculation. 6.1 Aug 29 This is a major update to iBend Pipe!

• Completely rebuilt with a modern Swift codebase for a better foundation going forward

• Updated and improved the interface to fix numerous layout issues from previous versions

• New native inch and fraction keypad for faster, more precise measurement entry

• Sliders and increment/decrement buttons have been replaced with the new keypad for a more efficient workflow

• Calculation results are now displayed on the same screen as your inputs

• All calculation screens are now truly one-page—enter your measurements and see your results without navigating between screens

This update lays the foundation for the future of iBend Pipe while making the app faster and easier to use on the job. 6.0 Aug 24 Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible. 5.3 01/02/2018 Bug Fixes

Fixes non responsiveness in Offset - 1st and 2nd bend critical calculations in INCH mode

Thanks Rodney! 5.2 10/05/2017 Bug Fixes
-Crashing when going to help screens on iOS 11 5.1 10/04/2017 Fast Calcs are only a flick of the wrist away...

Introducing the Offset Calculator App for your Apple Watch
-Calculate bends and shrink on a convenient one screen app
-Leave your phone in your pocket 5.0 02/12/2016 Had a couple "doglegs", "wows", "bugs" that I've resolved.

Thanks for all your great reviews and word of mouth recommendations.

You guys want an Apple Watch - Offset Calculator???? Let me know... 4.2.2 12/05/2015 Bug Fix.

Fixed crashing bug, when going to level view from basic 90° calculation screens. 4.2.1 07/21/2015 All basic, one screen calculations have been restored. The best of both worlds.
There is a new Basic / Advanced setting screen to give you complete control over which type of calculation is available. Choose Basic or Advanced or Both.

Bugs have also been squashed. Thanks to all the Beta testers.

NEW - A fast and always accessible offset calculator widget is now available. 4.2 07/06/2015 4.1
Back by popular demand, simple offsets, simple rolled offset, simple 3-bend and 4-bend saddles.

I will be adding the remaining "simple" calculations for 90's and corner bends in the next update, 4.2. I am working overtime to get this app working the way you want it.

Thanks for your feedback everyone. I want this app to the best for you. 4.1 06/24/2015 +ACCURATE CALCULATIONS
Centerline bending radius is now used to make all calculations to offer accurate calculations when compared to bending multiplier methods.

+BENDER PROFILES
Almost 100 different bender/pipe combinations included. You have the ability to tweak or completely modify any of the combinations to match your bender on the field. 4.0 06/10/2015 Fixes crashes using the back to back 90 calculation on devices running iOS 5.0, 5.1. 3.0.1 01/11/2013 *Version 3.0.1 has been submitted to Apple to fix crash when using Back to Back 90 calculation on iOS versions 5.0 and 5.1.

iBend Pipe, the best conduit bending on an iPhone, just got better.

New calculations include Back-To-Back 90°s, Kicked 90°s.

A flashlight has been added for those low light job conditions, no need to fire up a different app just use the built in flashlight utility.

The digital level has been reworked to respond faster to changes in angle.

The user interface has been cleaned up to make you proud to show it off to your buddies.

Don't know what the center of a bend is? Well I show you how to mark the center of bend for any angle and pipe size, with pictures.

Thank you guys for all your comments and suggestions, I read each and every email, and I try to incorporate your suggestions as I can. 3.0 01/07/2013 The best conduit bending app just got better!

-All New 90° Bend Calculation for Imperial (Metric coming soon)
with customizable bender take-ups.

-4 - Bend Calculation for Metric 2.10 10/26/2012 4 Bend Calculation is finally here!!!

A metric version of this calculation will be included in the next update. 2.9 04/27/2012 The best is yet to come... , but this is what this update includes:

- Fixed some minor bugs.
- Added a contact page to receive your comments, questions or suggestions.

I am currently working on a 4 point saddle calculation update, it has been a while, but I finally have some time to get this finished for you. Thank you for making this the #1 conduit bending app for iOS. I appreciate all your feedback and read every email that is sent. I'm a one man team, and your comments help fuel my late night coding. Thanks again. 2.8 04/21/2012 -ADDED BUILT IN LEVEL FINDER

--It has a "ZERO" button to calibrate level to 0, because we
know that nothing is really level out in the field.

--Level is automagically tuned to whatever angle you were bending.

---If you are bending a 90 it starts to beep around 90°

---If you are bending a 3 point saddle, it has both angle measurements in memory and you can toggle between target angles with the tap of a button.

---If it is custom angle, no sweat it knows you are trying to match that goofy 18° offset that your grandpa installed, and it'll let you know when you are close. 2.7 05/17/2011 -Added all new images for retina display

-Added animation in most of the views to make your friends drool - "...yeah, there are other bending calculator apps - but do they look like this?"

-Thanks for making "iBend Pipe" the #1 conduit bending application. Stay tuned for more updates, and as always keep those 5star rating coming.

-future updates include customizable bender takeups for 90° bends and a built in level finder 2.6 05/09/2011 - Added 90° Bend Calculation for Hand Benders

1/2" has a take-up of 5"
3/4" has a take-up of 6"
1" has a take-up of 8"

Look for it under the "More" tab.

-Metric version to be added later. If you use metric benders, email me at support@ibendpipe.com to get your input so that the correct metric take-up is entered into the calculations. First one to do so, gets promo codes for all my apps, iBendOffsets, My Bender, and Circuit Colors which allow you to use these free for one month. Thank you. 2.4 01/13/2011 -Added Retina Support

-Added Concentric Bend Calculation (for Imperial Measurements) under the "More" Tab. 2.3 12/15/2010 Added

+ Calculation for a compound 90 with a round obstruction

+ Calculation for a compound 90 with a square obstruction

+ Calculation for a compound 90 with a rectangular obstruction

+ Enhanced readability of display by coordinating colors of measurements with controls. 2.2 09/30/2010 -Calculate ROLLING OFFSETS by imputing horizontal and vertical distances.

-Total Shrink calculation added to 3-Bend Saddle

-Fractions and Metric Versions are supported

-New Graphics and Color Coordination of Sliders,that make it easier to see what value you are changing

-Optimization of code for better performance 2.1 09/17/2010

version 6.3

Version History Version 6.3

The basic 3 bend saddle calculation that allows you to pick from different sets of angles is back by popular demand.
The Watch app now has a round and square object in the corner calculation.
UI cleaned up for consistency with shapes and colors. 6.3 4d ago Version 6.2

The basic Kick calculation is back, simple and efficient, by popular demand.
The dual slider input view for value entry has a "long press" function to increase value rapidly instead of tapping repeatedly on the "+ 1" button.

Bug Fixes:
The slider input will not allow values below 1" to be entered.
The live angle view stayed live even when app was in background. 6.2 Sep 7 Version 6.1.

Basic calculation's double slider input is back, making it more precise and faster to input measurements.
Apple Watch companion app now has a Parallel Offset adjustment calculation. 6.1 Aug 29 This is a major update to iBend Pipe!

• Completely rebuilt with a modern Swift codebase for a better foundation going forward

• Updated and improved the interface to fix numerous layout issues from previous versions

• New native inch and fraction keypad for faster, more precise measurement entry

• Sliders and increment/decrement buttons have been replaced with the new keypad for a more efficient workflow

• Calculation results are now displayed on the same screen as your inputs

• All calculation screens are now truly one-page—enter your measurements and see your results without navigating between screens

This update lays the foundation for the future of iBend Pipe while making the app faster and easier to use on the job. 6.0 Aug 24 Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible. 5.3 01/02/2018 Bug Fixes

Fixes non responsiveness in Offset - 1st and 2nd bend critical calculations in INCH mode

Thanks Rodney! 5.2 10/05/2017 Bug Fixes
-Crashing when going to help screens on iOS 11 5.1 10/04/2017 Fast Calcs are only a flick of the wrist away...

Introducing the Offset Calculator App for your Apple Watch
-Calculate bends and shrink on a convenient one screen app
-Leave your phone in your pocket 5.0 02/12/2016 Had a couple "doglegs", "wows", "bugs" that I've resolved.

Thanks for all your great reviews and word of mouth recommendations.

You guys want an Apple Watch - Offset Calculator???? Let me know... 4.2.2 12/05/2015 Bug Fix.

Fixed crashing bug, when going to level view from basic 90° calculation screens. 4.2.1 07/21/2015 All basic, one screen calculations have been restored. The best of both worlds.
There is a new Basic / Advanced setting screen to give you complete control over which type of calculation is available. Choose Basic or Advanced or Both.

Bugs have also been squashed. Thanks to all the Beta testers.

NEW - A fast and always accessible offset calculator widget is now available. 4.2 07/06/2015 4.1
Back by popular demand, simple offsets, simple rolled offset, simple 3-bend and 4-bend saddles.

I will be adding the remaining "simple" calculations for 90's and corner bends in the next update, 4.2. I am working overtime to get this app working the way you want it.

Thanks for your feedback everyone. I want this app to the best for you. 4.1 06/24/2015 +ACCURATE CALCULATIONS
Centerline bending radius is now used to make all calculations to offer accurate calculations when compared to bending multiplier methods.

+BENDER PROFILES
Almost 100 different bender/pipe combinations included. You have the ability to tweak or completely modify any of the combinations to match your bender on the field. 4.0 06/10/2015 Fixes crashes using the back to back 90 calculation on devices running iOS 5.0, 5.1. 3.0.1 01/11/2013 *Version 3.0.1 has been submitted to Apple to fix crash when using Back to Back 90 calculation on iOS versions 5.0 and 5.1.

iBend Pipe, the best conduit bending on an iPhone, just got better.

New calculations include Back-To-Back 90°s, Kicked 90°s.

A flashlight has been added for those low light job conditions, no need to fire up a different app just use the built in flashlight utility.

The digital level has been reworked to respond faster to changes in angle.

The user interface has been cleaned up to make you proud to show it off to your buddies.

Don't know what the center of a bend is? Well I show you how to mark the center of bend for any angle and pipe size, with pictures.

Thank you guys for all your comments and suggestions, I read each and every email, and I try to incorporate your suggestions as I can. 3.0 01/07/2013 The best conduit bending app just got better!

-All New 90° Bend Calculation for Imperial (Metric coming soon)
with customizable bender take-ups.

-4 - Bend Calculation for Metric 2.10 10/26/2012 4 Bend Calculation is finally here!!!

A metric version of this calculation will be included in the next update. 2.9 04/27/2012 The best is yet to come... , but this is what this update includes:

- Fixed some minor bugs.
- Added a contact page to receive your comments, questions or suggestions.

I am currently working on a 4 point saddle calculation update, it has been a while, but I finally have some time to get this finished for you. Thank you for making this the #1 conduit bending app for iOS. I appreciate all your feedback and read every email that is sent. I'm a one man team, and your comments help fuel my late night coding. Thanks again. 2.8 04/21/2012 -ADDED BUILT IN LEVEL FINDER

--It has a "ZERO" button to calibrate level to 0, because we
know that nothing is really level out in the field.

--Level is automagically tuned to whatever angle you were bending.

---If you are bending a 90 it starts to beep around 90°

---If you are bending a 3 point saddle, it has both angle measurements in memory and you can toggle between target angles with the tap of a button.

---If it is custom angle, no sweat it knows you are trying to match that goofy 18° offset that your grandpa installed, and it'll let you know when you are close. 2.7 05/17/2011 -Added all new images for retina display

-Added animation in most of the views to make your friends drool - "...yeah, there are other bending calculator apps - but do they look like this?"

-Thanks for making "iBend Pipe" the #1 conduit bending application. Stay tuned for more updates, and as always keep those 5star rating coming.

-future updates include customizable bender takeups for 90° bends and a built in level finder 2.6 05/09/2011 - Added 90° Bend Calculation for Hand Benders

1/2" has a take-up of 5"
3/4" has a take-up of 6"
1" has a take-up of 8"

Look for it under the "More" tab.

-Metric version to be added later. If you use metric benders, email me at support@ibendpipe.com to get your input so that the correct metric take-up is entered into the calculations. First one to do so, gets promo codes for all my apps, iBendOffsets, My Bender, and Circuit Colors which allow you to use these free for one month. Thank you. 2.4 01/13/2011 -Added Retina Support

-Added Concentric Bend Calculation (for Imperial Measurements) under the "More" Tab. 2.3 12/15/2010 Added

+ Calculation for a compound 90 with a round obstruction

+ Calculation for a compound 90 with a square obstruction

+ Calculation for a compound 90 with a rectangular obstruction

+ Enhanced readability of display by coordinating colors of measurements with controls. 2.2 09/30/2010 -Calculate ROLLING OFFSETS by imputing horizontal and vertical distances.

-Total Shrink calculation added to 3-Bend Saddle

-Fractions and Metric Versions are supported

-New Graphics and Color Coordination of Sliders,that make it easier to see what value you are changing

-Optimization of code for better performance 2.1 09/17/2010 Version 2.0

-Added the ability to enter and display results in metric units cm.

-Calculations are live as you move the sliders...no need to touch "calculate" to see updated values.

-Removed user data acquisition capability

-Added ability to calculate 3 - bend offsets in 10 -20 -10 and 30-60-30 bends in addition to the previous choices. 2.0 05/20/2010

version 6.2

Version History Version 6.2

The basic Kick calculation is back, simple and efficient, by popular demand.
The dual slider input view for value entry has a "long press" function to increase value rapidly instead of tapping repeatedly on the "+ 1" button.

Bug Fixes:
The slider input will not allow values below 1" to be entered.
The live angle view stayed live even when app was in background. 6.2 2d ago Version 6.1.

Basic calculation's double slider input is back, making it more precise and faster to input measurements.
Apple Watch companion app now has a Parallel Offset adjustment calculation. 6.1 Aug 29 This is a major update to iBend Pipe!

• Completely rebuilt with a modern Swift codebase for a better foundation going forward

• Updated and improved the interface to fix numerous layout issues from previous versions

• New native inch and fraction keypad for faster, more precise measurement entry

• Sliders and increment/decrement buttons have been replaced with the new keypad for a more efficient workflow

• Calculation results are now displayed on the same screen as your inputs

• All calculation screens are now truly one-page—enter your measurements and see your results without navigating between screens

This update lays the foundation for the future of iBend Pipe while making the app faster and easier to use on the job. 6.0 Aug 24 Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible. 5.3 01/02/2018 Bug Fixes

Fixes non responsiveness in Offset - 1st and 2nd bend critical calculations in INCH mode

Thanks Rodney! 5.2 10/05/2017 Bug Fixes
-Crashing when going to help screens on iOS 11 5.1 10/04/2017 Fast Calcs are only a flick of the wrist away...

Introducing the Offset Calculator App for your Apple Watch
-Calculate bends and shrink on a convenient one screen app
-Leave your phone in your pocket 5.0 02/12/2016 Had a couple "doglegs", "wows", "bugs" that I've resolved.

Thanks for all your great reviews and word of mouth recommendations.

You guys want an Apple Watch - Offset Calculator???? Let me know... 4.2.2 12/05/2015 Bug Fix.

Fixed crashing bug, when going to level view from basic 90° calculation screens. 4.2.1 07/21/2015 All basic, one screen calculations have been restored. The best of both worlds.
There is a new Basic / Advanced setting screen to give you complete control over which type of calculation is available. Choose Basic or Advanced or Both.

Bugs have also been squashed. Thanks to all the Beta testers.

NEW - A fast and always accessible offset calculator widget is now available. 4.2 07/06/2015 4.1
Back by popular demand, simple offsets, simple rolled offset, simple 3-bend and 4-bend saddles.

I will be adding the remaining "simple" calculations for 90's and corner bends in the next update, 4.2. I am working overtime to get this app working the way you want it.

Thanks for your feedback everyone. I want this app to the best for you. 4.1 06/24/2015 +ACCURATE CALCULATIONS
Centerline bending radius is now used to make all calculations to offer accurate calculations when compared to bending multiplier methods.

+BENDER PROFILES
Almost 100 different bender/pipe combinations included. You have the ability to tweak or completely modify any of the combinations to match your bender on the field. 4.0 06/10/2015 Fixes crashes using the back to back 90 calculation on devices running iOS 5.0, 5.1. 3.0.1 01/11/2013 *Version 3.0.1 has been submitted to Apple to fix crash when using Back to Back 90 calculation on iOS versions 5.0 and 5.1.

iBend Pipe, the best conduit bending on an iPhone, just got better.

New calculations include Back-To-Back 90°s, Kicked 90°s.

A flashlight has been added for those low light job conditions, no need to fire up a different app just use the built in flashlight utility.

The digital level has been reworked to respond faster to changes in angle.

The user interface has been cleaned up to make you proud to show it off to your buddies.

Don't know what the center of a bend is? Well I show you how to mark the center of bend for any angle and pipe size, with pictures.

Thank you guys for all your comments and suggestions, I read each and every email, and I try to incorporate your suggestions as I can. 3.0 01/07/2013 The best conduit bending app just got better!

-All New 90° Bend Calculation for Imperial (Metric coming soon)
with customizable bender take-ups.

-4 - Bend Calculation for Metric 2.10 10/26/2012 4 Bend Calculation is finally here!!!

A metric version of this calculation will be included in the next update. 2.9 04/27/2012 The best is yet to come... , but this is what this update includes:

- Fixed some minor bugs.
- Added a contact page to receive your comments, questions or suggestions.

I am currently working on a 4 point saddle calculation update, it has been a while, but I finally have some time to get this finished for you. Thank you for making this the #1 conduit bending app for iOS. I appreciate all your feedback and read every email that is sent. I'm a one man team, and your comments help fuel my late night coding. Thanks again. 2.8 04/21/2012 -ADDED BUILT IN LEVEL FINDER

--It has a "ZERO" button to calibrate level to 0, because we
know that nothing is really level out in the field.

--Level is automagically tuned to whatever angle you were bending.

---If you are bending a 90 it starts to beep around 90°

---If you are bending a 3 point saddle, it has both angle measurements in memory and you can toggle between target angles with the tap of a button.

---If it is custom angle, no sweat it knows you are trying to match that goofy 18° offset that your grandpa installed, and it'll let you know when you are close. 2.7 05/17/2011 -Added all new images for retina display

-Added animation in most of the views to make your friends drool - "...yeah, there are other bending calculator apps - but do they look like this?"

-Thanks for making "iBend Pipe" the #1 conduit bending application. Stay tuned for more updates, and as always keep those 5star rating coming.

-future updates include customizable bender takeups for 90° bends and a built in level finder 2.6 05/09/2011 - Added 90° Bend Calculation for Hand Benders

1/2" has a take-up of 5"
3/4" has a take-up of 6"
1" has a take-up of 8"

Look for it under the "More" tab.

-Metric version to be added later. If you use metric benders, email me at support@ibendpipe.com to get your input so that the correct metric take-up is entered into the calculations. First one to do so, gets promo codes for all my apps, iBendOffsets, My Bender, and Circuit Colors which allow you to use these free for one month. Thank you. 2.4 01/13/2011 -Added Retina Support

-Added Concentric Bend Calculation (for Imperial Measurements) under the "More" Tab. 2.3 12/15/2010 Added

+ Calculation for a compound 90 with a round obstruction

+ Calculation for a compound 90 with a square obstruction

+ Calculation for a compound 90 with a rectangular obstruction

+ Enhanced readability of display by coordinating colors of measurements with controls. 2.2 09/30/2010 -Calculate ROLLING OFFSETS by imputing horizontal and vertical distances.

-Total Shrink calculation added to 3-Bend Saddle

-Fractions and Metric Versions are supported

-New Graphics and Color Coordination of Sliders,that make it easier to see what value you are changing

-Optimization of code for better performance 2.1 09/17/2010 Version 2.0

-Added the ability to enter and display results in metric units cm.

-Calculations are live as you move the sliders...no need to touch "calculate" to see updated values.

-Removed user data acquisition capability

-Added ability to calculate 3 - bend offsets in 10 -20 -10 and 30-60-30 bends in addition to the previous choices. 2.0 05/20/2010 -Added Segment Bend Calculator
-Minor UI optimiztion 1.1 04/06/2010

version 6.1

Version History Version 6.1.

Basic calculation's double slider input is back, making it more precise and faster to input measurements.
Apple Watch companion app now has a Parallel Offset adjustment calculation. 6.1 4d ago This is a major update to iBend Pipe!

• Completely rebuilt with a modern Swift codebase for a better foundation going forward

• Updated and improved the interface to fix numerous layout issues from previous versions

• New native inch and fraction keypad for faster, more precise measurement entry

• Sliders and increment/decrement buttons have been replaced with the new keypad for a more efficient workflow

• Calculation results are now displayed on the same screen as your inputs

• All calculation screens are now truly one-page—enter your measurements and see your results without navigating between screens

This update lays the foundation for the future of iBend Pipe while making the app faster and easier to use on the job. 6.0 Aug 24 This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.

Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible. 5.3 01/02/2018 Bug Fixes

Fixes non responsiveness in Offset - 1st and 2nd bend critical calculations in INCH mode

Thanks Rodney! 5.2 10/05/2017 Bug Fixes
-Crashing when going to help screens on iOS 11 5.1 10/04/2017 Fast Calcs are only a flick of the wrist away...

Introducing the Offset Calculator App for your Apple Watch
-Calculate bends and shrink on a convenient one screen app
-Leave your phone in your pocket 5.0 02/12/2016 Had a couple "doglegs", "wows", "bugs" that I've resolved.

Thanks for all your great reviews and word of mouth recommendations.

You guys want an Apple Watch - Offset Calculator???? Let me know... 4.2.2 12/05/2015 Bug Fix.

Fixed crashing bug, when going to level view from basic 90° calculation screens. 4.2.1 07/21/2015 All basic, one screen calculations have been restored. The best of both worlds.
There is a new Basic / Advanced setting screen to give you complete control over which type of calculation is available. Choose Basic or Advanced or Both.

Bugs have also been squashed. Thanks to all the Beta testers.

NEW - A fast and always accessible offset calculator widget is now available. 4.2 07/06/2015 4.1
Back by popular demand, simple offsets, simple rolled offset, simple 3-bend and 4-bend saddles.

I will be adding the remaining "simple" calculations for 90's and corner bends in the next update, 4.2. I am working overtime to get this app working the way you want it.

Thanks for your feedback everyone. I want this app to the best for you. 4.1 06/24/2015 +ACCURATE CALCULATIONS
Centerline bending radius is now used to make all calculations to offer accurate calculations when compared to bending multiplier methods.

+BENDER PROFILES
Almost 100 different bender/pipe combinations included. You have the ability to tweak or completely modify any of the combinations to match your bender on the field. 4.0 06/10/2015 Fixes crashes using the back to back 90 calculation on devices running iOS 5.0, 5.1. 3.0.1 01/11/2013 *Version 3.0.1 has been submitted to Apple to fix crash when using Back to Back 90 calculation on iOS versions 5.0 and 5.1.

iBend Pipe, the best conduit bending on an iPhone, just got better.

New calculations include Back-To-Back 90°s, Kicked 90°s.

A flashlight has been added for those low light job conditions, no need to fire up a different app just use the built in flashlight utility.

The digital level has been reworked to respond faster to changes in angle.

The user interface has been cleaned up to make you proud to show it off to your buddies.

Don't know what the center of a bend is? Well I show you how to mark the center of bend for any angle and pipe size, with pictures.

Thank you guys for all your comments and suggestions, I read each and every email, and I try to incorporate your suggestions as I can. 3.0 01/07/2013 The best conduit bending app just got better!

-All New 90° Bend Calculation for Imperial (Metric coming soon)
with customizable bender take-ups.

-4 - Bend Calculation for Metric 2.10 10/26/2012 4 Bend Calculation is finally here!!!

A metric version of this calculation will be included in the next update. 2.9 04/27/2012 The best is yet to come... , but this is what this update includes:

- Fixed some minor bugs.
- Added a contact page to receive your comments, questions or suggestions.

I am currently working on a 4 point saddle calculation update, it has been a while, but I finally have some time to get this finished for you. Thank you for making this the #1 conduit bending app for iOS. I appreciate all your feedback and read every email that is sent. I'm a one man team, and your comments help fuel my late night coding. Thanks again. 2.8 04/21/2012 -ADDED BUILT IN LEVEL FINDER

--It has a "ZERO" button to calibrate level to 0, because we
know that nothing is really level out in the field.

--Level is automagically tuned to whatever angle you were bending.

---If you are bending a 90 it starts to beep around 90°

---If you are bending a 3 point saddle, it has both angle measurements in memory and you can toggle between target angles with the tap of a button.

---If it is custom angle, no sweat it knows you are trying to match that goofy 18° offset that your grandpa installed, and it'll let you know when you are close. 2.7 05/17/2011 -Added all new images for retina display

-Added animation in most of the views to make your friends drool - "...yeah, there are other bending calculator apps - but do they look like this?"

-Thanks for making "iBend Pipe" the #1 conduit bending application. Stay tuned for more updates, and as always keep those 5star rating coming.

-future updates include customizable bender takeups for 90° bends and a built in level finder 2.6 05/09/2011 - Added 90° Bend Calculation for Hand Benders

1/2" has a take-up of 5"
3/4" has a take-up of 6"
1" has a take-up of 8"

Look for it under the "More" tab.

-Metric version to be added later. If you use metric benders, email me at support@ibendpipe.com to get your input so that the correct metric take-up is entered into the calculations. First one to do so, gets promo codes for all my apps, iBendOffsets, My Bender, and Circuit Colors which allow you to use these free for one month. Thank you. 2.4 01/13/2011 -Added Retina Support

-Added Concentric Bend Calculation (for Imperial Measurements) under the "More" Tab. 2.3 12/15/2010 Added

+ Calculation for a compound 90 with a round obstruction

+ Calculation for a compound 90 with a square obstruction

+ Calculation for a compound 90 with a rectangular obstruction

+ Enhanced readability of display by coordinating colors of measurements with controls. 2.2 09/30/2010 -Calculate ROLLING OFFSETS by imputing horizontal and vertical distances.

-Total Shrink calculation added to 3-Bend Saddle

-Fractions and Metric Versions are supported

-New Graphics and Color Coordination of Sliders,that make it easier to see what value you are changing

-Optimization of code for better performance 2.1 09/17/2010 Version 2.0

-Added the ability to enter and display results in metric units cm.

-Calculations are live as you move the sliders...no need to touch "calculate" to see updated values.

-Removed user data acquisition capability

-Added ability to calculate 3 - bend offsets in 10 -20 -10 and 30-60-30 bends in addition to the previous choices. 2.0 05/20/2010 -Added Segment Bend Calculator
-Minor UI optimiztion 1.1 04/06/2010 1.0 11/16/2009

version 5.3

Version History This update from Apple will improve the functionality of this app. No new features are included.

Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible. 5.3 01/02/2018 Bug Fixes

Fixes non responsiveness in Offset - 1st and 2nd bend critical calculations in INCH mode

Thanks Rodney! 5.2 10/05/2017 Bug Fixes
-Crashing when going to help screens on iOS 11 5.1 10/04/2017 Fast Calcs are only a flick of the wrist away...

Introducing the Offset Calculator App for your Apple Watch
-Calculate bends and shrink on a convenient one screen app
-Leave your phone in your pocket 5.0 02/12/2016 Had a couple "doglegs", "wows", "bugs" that I've resolved.

Thanks for all your great reviews and word of mouth recommendations.

You guys want an Apple Watch - Offset Calculator???? Let me know... 4.2.2 12/05/2015 Bug Fix.

Fixed crashing bug, when going to level view from basic 90° calculation screens. 4.2.1 07/21/2015 All basic, one screen calculations have been restored. The best of both worlds.
There is a new Basic / Advanced setting screen to give you complete control over which type of calculation is available. Choose Basic or Advanced or Both.

Bugs have also been squashed. Thanks to all the Beta testers.

NEW - A fast and always accessible offset calculator widget is now available. 4.2 07/06/2015 4.1
Back by popular demand, simple offsets, simple rolled offset, simple 3-bend and 4-bend saddles.

I will be adding the remaining "simple" calculations for 90's and corner bends in the next update, 4.2. I am working overtime to get this app working the way you want it.

Thanks for your feedback everyone. I want this app to the best for you. 4.1 06/24/2015 +ACCURATE CALCULATIONS
Centerline bending radius is now used to make all calculations to offer accurate calculations when compared to bending multiplier methods.

+BENDER PROFILES
Almost 100 different bender/pipe combinations included. You have the ability to tweak or completely modify any of the combinations to match your bender on the field. 4.0 06/10/2015 Fixes crashes using the back to back 90 calculation on devices running iOS 5.0, 5.1. 3.0.1 01/11/2013 *Version 3.0.1 has been submitted to Apple to fix crash when using Back to Back 90 calculation on iOS versions 5.0 and 5.1.

iBend Pipe, the best conduit bending on an iPhone, just got better.

New calculations include Back-To-Back 90°s, Kicked 90°s.

A flashlight has been added for those low light job conditions, no need to fire up a different app just use the built in flashlight utility.

The digital level has been reworked to respond faster to changes in angle.

The user interface has been cleaned up to make you proud to show it off to your buddies.

Don't know what the center of a bend is? Well I show you how to mark the center of bend for any angle and pipe size, with pictures.

Thank you guys for all your comments and suggestions, I read each and every email, and I try to incorporate your suggestions as I can. 3.0 01/07/2013 The best conduit bending app just got better!

-All New 90° Bend Calculation for Imperial (Metric coming soon)
with customizable bender take-ups.

-4 - Bend Calculation for Metric 2.10 10/26/2012 4 Bend Calculation is finally here!!!

A metric version of this calculation will be included in the next update. 2.9 04/27/2012 The best is yet to come... , but this is what this update includes:

- Fixed some minor bugs.
- Added a contact page to receive your comments, questions or suggestions.

I am currently working on a 4 point saddle calculation update, it has been a while, but I finally have some time to get this finished for you. Thank you for making this the #1 conduit bending app for iOS. I appreciate all your feedback and read every email that is sent. I'm a one man team, and your comments help fuel my late night coding. Thanks again. 2.8 04/21/2012 -ADDED BUILT IN LEVEL FINDER

--It has a "ZERO" button to calibrate level to 0, because we
know that nothing is really level out in the field.

--Level is automagically tuned to whatever angle you were bending.

---If you are bending a 90 it starts to beep around 90°

---If you are bending a 3 point saddle, it has both angle measurements in memory and you can toggle between target angles with the tap of a button.

---If it is custom angle, no sweat it knows you are trying to match that goofy 18° offset that your grandpa installed, and it'll let you know when you are close. 2.7 05/17/2011 -Added all new images for retina display

-Added animation in most of the views to make your friends drool - "...yeah, there are other bending calculator apps - but do they look like this?"

-Thanks for making "iBend Pipe" the #1 conduit bending application. Stay tuned for more updates, and as always keep those 5star rating coming.

-future updates include customizable bender takeups for 90° bends and a built in level finder 2.6 05/09/2011 - Added 90° Bend Calculation for Hand Benders

1/2" has a take-up of 5"
3/4" has a take-up of 6"
1" has a take-up of 8"

Look for it under the "More" tab.

-Metric version to be added later. If you use metric benders, email me at support@ibendpipe.com to get your input so that the correct metric take-up is entered into the calculations. First one to do so, gets promo codes for all my apps, iBendOffsets, My Bender, and Circuit Colors which allow you to use these free for one month. Thank you. 2.4 01/13/2011 -Added Retina Support

-Added Concentric Bend Calculation (for Imperial Measurements) under the "More" Tab. 2.3 12/15/2010 Added

+ Calculation for a compound 90 with a round obstruction

+ Calculation for a compound 90 with a square obstruction

+ Calculation for a compound 90 with a rectangular obstruction

+ Enhanced readability of display by coordinating colors of measurements with controls. 2.2 09/30/2010 -Calculate ROLLING OFFSETS by imputing horizontal and vertical distances.

-Total Shrink calculation added to 3-Bend Saddle

-Fractions and Metric Versions are supported

-New Graphics and Color Coordination of Sliders,that make it easier to see what value you are changing

-Optimization of code for better performance 2.1 09/17/2010 Version 2.0

-Added the ability to enter and display results in metric units cm.

-Calculations are live as you move the sliders...no need to touch "calculate" to see updated values.

-Removed user data acquisition capability

-Added ability to calculate 3 - bend offsets in 10 -20 -10 and 30-60-30 bends in addition to the previous choices. 2.0 05/20/2010 -Added Segment Bend Calculator
-Minor UI optimiztion 1.1 04/06/2010 1.0 11/16/2009

version 5.3

Jan 2, 2018
Version 5.3
This app has been updated by Apple to display the Apple Watch app icon.

Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible.

version 5.3

Jan 2, 2018
Version 5.3
This app has been updated by Apple to display the Apple Watch app icon.

Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible.

version 5.3

This app has been updated by Apple to display the Apple Watch app icon.

Bug Fixed - Offset Widget was only showing half of the controls, now all the controls are visible.

version 5.0